How to fix flashlight not working on iPhone 13 2022

When the iPhone 13 flashlight doesn’t work, don’t groping in the dark, follow these troubleshooting tips to fix iPhone 13 flashlight not working.

Why won’t my flashlight work on my iPhone 13

Long gone are the days of searching for a flashlight in a drawer or storage box, fretting over how much battery power is left, or groaning at the lack of brightness. These days, we rely on our multifunctional iPhone 13s, which we keep close at hand. That is, if the iPhone 13 flashlight works.
When the flashlight not working on iPhone 13 and we see the flashlight icon grayed out, we are greatly disturbed. Let’s take a look at different solutions to fix it.

Ways to fix iPhone 13 flashlight not working

Turn off low power mode

Low Power Mode disables some features of the iPhone 13 to conserve battery power. When enabled, the color of the remaining battery charge is displayed in yellow instead of green. When the battery level drops below 20%, the Low Power Mode prompt appears automatically. If you want to save battery power, you can always put the iPhone 13 in low power mode.
However, the iPhone 13’s flashlight is often one of the features disabled by this mode.

  • To turn off low power mode,
  • open the Settings app, select Battery,
  • and tap Turn off low power mode.

Charging the iPhone 13

Sometimes the iPhone 13 flashlight will not work even when low power mode is turned off. This may be due to your device’s battery not having enough remaining power to support its current function. Therefore, you will need to connect your iPhone 13 to a power source to begin charging.
Once the iPhone 13 is supplied with sufficient power, the flashlight function will work again.

Check to see if the iPhone 13 is overheating.

If the iPhone 13 gets hot, the flashlight may not work. It is not recommended to continue using an overheated iPhone 13. If the device exceeds a certain temperature limit, it will eventually switch off until it cools down. If the temperature is too high, a warning will appear on the screen.
To naturally lower the temperature of the device, place the iPhone 13 in a cool, dry place out of direct sunlight. However, please do not place the device in a refrigerator, as this may cause damage to the device. Just find a naturally cool and shaded location. Once the device has cooled down, the iPhone 13 flashlight should start working again.

Remove the flashlight from the Control Center

To solve the problem of the iPhone 13 flashlight not working, one possible fix is to remove the flashlight option from the Control Center and then add it back in. Here is how to do it.

  1. Open the “Settings” application. Select “Control Center“.
  2. Under “Included Controls,” tap the red minus (-) icon for “Flashlight” (“Flashlight” in some regions). Tap Delete to confirm.
  3. To return the flashlight, scroll down to the More Controls section.
  4. Tap the plus (+) icon for the flashlight.

Exit the iPhone 13 camera application.

The iPhone 13 camera flash function uses the same light as a flashlight. It is normal for the flashlight icon in the Control Center to be grayed out when the Camera application is open. This is because the two functions cannot be used simultaneously.

To resolve this issue, exit the camera application and return to the Control Center. You should see that the flashlight button can be selected normally again.

Using the camera flash to turn on the torch

If you are unable to activate the iPhone 13 torch from the Control Center, one solution is to activate the flash function in the Camera application and turn it on. Here is how to do it.

  1. In the Camera application, set the camera to video mode.
  2. Drag the bottom menu (“Video” in Word) up to reveal more options.
  3. Tap the flash icon. Select “On“.
iphone flashlight not working

Turn on the flash in the iPhone 13 camera application.

To solve the problem of the iPhone 13 torch not working, try turning the camera flash on and off. The procedure is the same as the previous solution: turn on the iPhone 13 camera flash. However, do not leave the flash on, but turn it on and off several times.

Update the iPhone 13’s iOS.

iOS updates usually include fixes for performance bugs and various other issues. So, what you probably need to do to fix your iPhone 13 torch is to update your device to the latest version of iOS. If you are not sure what to do, please see our iPhone 13 update guide.

Restart your iPhone 13

If the above methods do not solve the problem and the iPhone 13 torch still does not work, the next thing to try is to restart your iPhone 13.

The method required will vary depending on your iPhone 13 model. In general, however, you can restart your iPhone 13 by going to Settings > General > Power Off and pressing and holding the side button after turning it off. If you are not sure what steps to take, please refer to How to Restart iPhone 13.

Restore iPhone 13 to a previous backup

Besides updating and restarting your iPhone 13, you can also try restoring your iPhone 13 to a backup from when the flashlight was working normally. Keep in mind, however, that if you use this method, any new data added to the device after that backup was created will also be lost.

Reset all iPhone 13 settings

If there is no other way, the last solution you can try is to reset your iPhone 13 settings. Be careful not to tap “Clear All Content and Settings“. If you do not, rest assured that you will not lose any content from your iPhone 13.

Please note that the reset process may take some time, especially if you have a lot of data on your iPhone 13. So, if you are stuck in the dark and desperately need a flashlight, do not resort to resetting your iPhone 13 right away!

Effective remedies for iPhone 13 flashlight not working

If your iPhone 13 flashlight not working, we hope this list of fixes has effectively helped you solve the problem. However, if the problem persists, we recommend that you contact an authorized Apple service provider. A technician will then examine your device and determine the possibility of any necessary hardware repairs.

iPhone 13 flashlight not working on lock screen

My iPhone 13 flashlight not working with the latest version. There are a number of software solutions available to solve this problem; many people assume that Apple’s iOS is free of software-related problems, but that is not true at all. It is good to know that these problems can be solved by applying official solutions rather than third-party fixes.

Update your Apple device to the latest iOS version

Apple releases the latest iOS version every year, which has both good and bad aspects. It is not possible to require readers to update their iOS version to iOS 14 or any other version. For the past six months, I have not updated my iPhone 13 software and Apple has released iOS 14, but I have avoided it. apple’s latest mobile operating system has serious software issues that drain the battery. There are also performance issues, and we must point out that future patches are not reliable.

iOS 14 has had over 7 updates since its official release and it has only been 4 months. iOS 14 is only 4 months old. we would ask you to update the iOS version, but due to the continued bugs & glitches in the mobile OS, we do not recommend it.

Close background apps.

iOS RAM management is notorious among consumers and other users worldwide. Millions of iOS device owners leave applications running in the background without closing them. However, this is not healthy for some apps because they use the same modules used by other apps running in the background.

Please close the camera app and any other apps that use the camera, such as Skype, FaceTime, Camera, Discord, Chrome, etc. A quick restart after closing the app will end the session and trash the temporary files.

Reset all Apple iPhone 13 content and settings.

Apple allows users to reset the device to factory settings and configure it as a new device. The nice thing is that it deletes all of the phone’s data, including the Trash, collected temporary files, and settings. The reader can set the phone as a new device, but all data on the phone will be erased. To restore photos, videos, chats, apps, etc., you will need to create an iCloud backup or create a local backup (recommended).

  1. Select Settings > General.
  2. Swipe down the screen.
  3. Tap Reset > Reset All Content and Settings > Erase.

To upload data to Cloud Storage and restore it later, your device must be connected to iCloud. Uploading media files to cloud storage is not recommended, as it takes longer to recover them via the Internet.

What is the worst case scenario?

The flashlight is unusable because it is malfunctioning to the point that it requires professional help. Faulty or damaged flashlights are common and nothing to worry about; an Apple-certified engineer can fix it at a service center, but be sure to check online reviews of that store. Many Apple device owners complain of being overcharged by Apple service centers or having unsatisfactory repairs.

Thank you for reading iPhone 13 flashlight not working.

Leave a Comment