How to reset samsung remote | easy steps

If you’re having trouble with your Samsung TV remote control, you may want to reset it in order to fix the problem. Your remote control may need to be reset if it isn’t working well or is set to operate other devices instead of your TV. Follow these steps to reset your Samsung TV remote and get back to watching your favorite shows without interruption.

How to reset a samsung remote

To re-initialize your Samsung TV remote, remove the batteries and then press the Power button for 8 seconds. Then replace the batteries and see if your remote is now working.

This is one of the methods that you can use to fix your remote, depending on what model of TV you have. Let’s take a look at some of the other ways you can figure out if the remote is the issue.

Video: Samsung Smart TV: How to Pair, Unpair, & how to reset a samsung remote (Remote Not Working?)

How to reset a samsung remote

Why the Samsung remote doesn’t work?

Lots of things can affect the appearance that your Samsung remote is malfunctioning. A number of these issues can be resolved with common troubleshooting techniques. If your remote’s batteries are out of power, it may stop working. Use fresh batteries to fix the issue.

A remote to a Samsung TV may also be broken because of an internal flaw in the remote. Turning off the remote’s batteries by pressing a button or removing and reinstalling them should solve this issue. You should now be able to control your remote with ease.

One cause of a faulty remote might be the infrared sensor on your Samsung TV that sends signals to the remote. Confirm that there is nothing obstructing the television before using the remote to change the channel. How to reprogram samsung remote?

How to Reset Your Samsung TV from Settings

So, if you think the problem with your TV is its reset, follow these three easy steps to fix it.

  • Open Settings by tapping on it.
  • You should pick the General option.
  • Take a deep breath and restart.
  • The default PIN is 0000.

This may solve your problem. I had the same issue with my TV, and I just turned it off and back on, and it fixed the problem.

How to reset samsung remote from the Remote

Here is how to reset a samsung remote.

To reset your Samsung TV to factory settings

  • In order to shut off the power, you must hold the Exit button for 12 seconds.
  • After you press the button, the standby light should blink while you hold it, and should stop when you release the button.
  • In addition, it should warn the user before carrying out the factory reset.
  • Press OK to start the TV over.

Next, let’s talk about the next way to reset your TV.

Methods that help the most to get the most out of your Samsung TV

It might have stopped working for a number of reasons, from something quite obvious to something more unusual.

Here are some of the most common causes of this issue for your reference.

Let’s start with this manual for the Samsung smart remote to learn how to use it.

Ensure that your network is working.

This could be a good starting point, since your Smart TV or remote will never work properly if you don’t have a reliable Internet connection.

Well, to be honest, I find it enjoyable to plug things in and out every once in a while, so let’s give it a shot.

  • Disconnect your modem, router, and television.
  • You should wait about 1 minute.
  • Place them back on the wall socket

Carefully clean the infrared sensor or remote control unit.

The cost of this solution is free and installation takes just a few minutes.

If the terminals of the sensor and the cable that connects to the board have become dusty, the sensor may not be able to send and receive the signals.

additionally, it is possible to use the same procedure on your remote sensor to ensure that it is clean and functional.

Replace all the batteries if they are worn out.

We did mention that some of them were obvious, and one of the more clear indications is a flat battery.

The first thing to check when your remote is not working is whether or not the batteries are getting low on power.

The quickest and most reliable way to fix this is to just pop in a fresh set of batteries into your remote.

Confirm that the remote is paired with the system.

We know; the remote has been paired with the product before. it doesn’t make sense why they would pair it up again now.

Given that this is an age of technological dependency, such accidents unfortunately happen.

  • If you’re unsure why your remote isn’t working and you’ve confirmed the batteries are properly put in, it’s worth looking to see if the remote is still synced to the TV.
  • Press and hold the Play/Pause and Return buttons together for five seconds.
  • At this point, your TV will start syncing with the Smart Remote.

Make sure your television has been updated with the latest software.

If there’s a problem with your TV and your remote works for other TVs, the problem might be with your remote.

Perhaps there’s a problem with the TV’s software, but to rule that out, let’s check if there’s anything that needs to be done.

Although it might vary between shows, this is a good guideline for procedure.

  • In order to choose the best service plan, go to Settings > All Settings > Support and find the right one.
  • Select Software Update from the list.

For example, on the list of Networks, choose ‘Select Network’. If you don’t see this option, don’t worry about it.To install the update, select Yes/OK from the list of options.

Make sure there’s no interference.

With a Samsung Smart TV, the remote should be able to connect with the television via Bluetooth, but if you have an infrared remote, ensure that there are no obstructions between the remote and the television receiver when you are using it.

Power cycle the television.

Problems may arise with any complex software, particularly if it has been in use for a long time without a reboot.

This software that makes Smart TVs smart is also susceptible to this type of problem, so before concluding that your remote or TV is malfunctioning, it might be worthwhile to do a hard reset.

In order to create this awareness, you must simply turn off the television and unplug it for a little while.

Attempting to identify the source of a problem typically starts here.

  • Simply continue to hold the power button on your remote control for approximately 5 seconds and the television will turn back on.
  • If you are still having the problem, disconnect the television from the wall and try again. Then press and hold the power button until the television turns off.
  • Reconnect the power cord to the television after 2 minutes.

Buy a universal remote.

Even if it might seem strange, an original TV remote control could be the root of all the frustration.

Purchasing a new remote control, ideally a universal one, might help. It costs just a few dollars.

Leave a Comment